Maintenance Guide
Marble Sculpture
1
Regularly wipe marble sculptures with a soft, damp cloth to remove dust and dirt. This helps maintain the surface's beauty and prevents dirt buildup.
2
Apply a suitable wax to marble sculptures regularly to enhance their natural luster and provide a protective layer against dust and moisture.
3
In cold weather, measures should be taken to protect the sculpture from frost, as freezing temperatures can cause marble to crack.
4
After cleaning, be sure to dry the sculpture thoroughly with a clean towel to prevent moisture from seeping into the marble.
5
In dry environments, consider using a humidifier to maintain appropriate humidity around the sculpture to help prevent cracking or drying.
6
Make sure to place the sculpture on a stable surface to prevent it from tipping over or falling and causing serious damage.
Stainless Steel Sculpture
1
对于青铜雕塑上的顽固污渍，请使用温和的肥皂水溶液或市售的青铜清洁剂。用软布擦拭，然后用清水彻底冲洗并完全晾干。
2
定期用干净柔软的布擦拭表面，去除灰尘和污垢。仅使用不含氯或酸的温和清洁产品。
3
定期检查雕塑的连接部件和焊接点，查看是否有松动或损坏迹象。避免雕塑被重物撞击或被尖锐物品接触。
4
避免将雕塑放置在湿度或温度过高的环境中；而应将其放置在干燥、通风良好的地方。避免接触腐蚀性化学品，例如强酸、强碱和其他有害物质。
5
将几滴温和的、不含氯的肥皂或洗涤剂与温水混合。避免使用刺激性化学品或研磨性清洁剂。
6
涂上一层透明保护漆或抗紫外线蜡可以帮助保护雕塑免受环境因素的影响，尤其对于户外雕塑而言。根据需要重新涂刷。
Acrylic Sculpture
1
Gently wipe away surface dust with a clean, soft cloth or phone dust removal stickers. Alternatively, you can use a damp towel, newspaper, or lightly dip in a small amount of beer or warm vinegar to wipe the surface.
2
You can try using toothpaste containing silicone. Gently apply it in a circular motion with your fingertip, then polish with a slightly damp, soft cloth. Avoid using whitening toothpaste with abrasive granules.
3
Acrylic is prone to oxidation and yellowing when exposed to sunlight or ultraviolet rays. It is best to place it in a cool, indoor area away from direct exposure to sunlight.
4
Always use a soft microfiber cloth, eyeglass cloth, 100% cotton cloth, or sponge. The use of rough rags, paper towels, steel wool, hard-bristled brushes, or any cleaning tools containing abrasive particles is strictly prohibited, as they can cause permanent scratches immediately.
Fiberglass Sculpture
1
存放雕塑时，请确保将其置于干燥、无尘的环境中。避免潮湿和污垢积聚，因为长时间暴露在潮湿和污垢环境中会对材料造成损坏。
2
定期用干净柔软的布轻轻擦拭玻璃纤维雕塑，去除灰尘和污垢。如有必要，可以使用温水和少量温和的肥皂进行清洁。
3
避免将雕塑暴露在极端温度或温度波动较大的环境中，因为这可能会导致材料应力。
4
请勿在雕塑上放置重物，以免变形或结构损坏。务必确保雕塑安装牢固，防止倾倒或倒塌，以免造成财产损失或人身伤害。
Bronze Sculpture
1
Clean with warm water and mild soap. Wipe gently with a soft cloth. For stubborn stains, a soft-bristled wire-free brush or toothbrush can be used. Rinse thoroughly to remove all soap residue.
2
Do not use harsh chemicals, cleaners, rust removers, or unknown substances. These agents can damage the patina.
3
In coastal areas, salty air can accelerate the transformation of the patina, causing it to develop reddish or greenish tones. This is a natural process, and some consider it to have aesthetic value.
4
Quickly remove resin, bird droppings, or other residues with warm water. For stubborn stains, gently scrape with a soft plastic scraper. Ensure that moisture in the pores of the metal evaporates completely.
5
Avoid contact with chemicals such as fertilizers, chlorine, pesticides, or ammonia. These substances can have adverse effects on the patina.
6
Over time, the patina will gradually soften and deepen, which is part of the charm of bronze objects. Frequent touching, nearby shrubs, or bird activity can all accelerate the wear of the patina.